• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass so that any shards will fall on the fabric rather than on the floor, where they could be trodden under and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will prevent water and drafts from entering your home until a professional comes out to fix the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap between the window and the door is substantial, you may prefer a security screen that also includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash window repair. However, over time, they are susceptible to a range of problems including sliding. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for fit. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you can't reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles may also loosen up. Most often it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. The first step is to close the window and then perform a test fit. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's important to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on the severity of the problem the caulking used previously may need to be removed before a fresh layer can be put on. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris inside them and that the sill pan is properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazing repairers-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze, it may be the hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier with someone else to assist in holding the frame up.

Check that the uPVC hinges are closed and open in the proper direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.

The issue could be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to provide suggestions.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a good method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become unbalanced due to wear, creating a gap where the sash and frame meet. If they're beyond repair, it might be required to realign them. The second is the interlock, which is located on the hinge side of the window, can also be misaligned, and again it is feasible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help prevent draughts. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it is more cost-effective to replace them instead of fixing them. If you are experiencing issues with your Upvc window you should consult a professional as soon as you can.